Topseller
Andrews, M8 camshaft .485" valve lift
MCS-975460 - Bolt-in. For 107"-132" engines. Highest lift available for stock valve springs. Low & midrange power (1500-5600+ RPM). Note: Bearings; o-rings and hardware are not included. Fitment: 18-23 Softail; 17-23 Touring
Inhalt
1 Stück
312,08 €
*
Andrews, 465B M8 camshaft .464"/.460" valve lift
MCS-975459 - Bolt-in. For 107" to 124" engines. .464" intake and .460" exhaust valve lift. Agressive cam for middle to heavy weight bikes. Low & midrange power. (1200-5600+ RPM). Note: Bearings; o-rings and hardware are not included....
Inhalt
1 Stück
312,08 €
*
Andrews, M8 camshaft .554" valve lift
MCS-979363 - Requires high-lift springs. The cam for large 117/124/143" etc. engines. More torque and power throughout RPM range. The dyno run of a modified 143" engine showed 173 ft. lbs torque @ 3700 RPM and 155 HP @ 5600 RPM...
Inhalt
1 Stück
312,08 €
*
JIMS, 1362G cam .565" lift for Evo Big Twin
MCS-978591 - .565" valve lift. For 89"-113" engines with headwork and 9.75:1CR or higher. Requires free flowing intake and mufflers. 3000-6000+ RPM range. Performance valve springs required. Intake open/close: 24/50 degrees. Exhaust...
Inhalt
1 Stück
474,09 €
*
Replacement shaft, without cam lobes. Front...
MCS-971619 - Front exhaust. Replacement (cam) shaft only. Used to replace worn out shafts only when cam lobes are still within specs. Shaft length approx. 7.6cm. Fitment: 37-73 45" WL; WLDR; 37-48 74" U; UL & 80" UH; ULH (NU)
Inhalt
1 Stück
38,56 €
*
Replacement shaft, without cam lobes. Front intake
MCS-971618 - Front intake. Replacement (cam) shaft only. Used to replace worn out shafts only when cam lobes are still within specs. Shaft length approx. 8.6cm. Fitment: 37-73 45" WL; WLDR; 37-48 74" U; UL & 80" UH; ULH (NU)
Inhalt
1 Stück
35,98 €
*
Replacement shaft, without cam lobes. Rear exhaust
MCS-971617 - Rear exhaust (pump drive). Replacement (cam) shaft only. Used to replace worn out shafts only when cam lobes are still within specs. Fitment: 37-73 45" WL; WLDR; 37-48 74" U; UL & 80" UH; ULH (NU)
Inhalt
1 Stück
42,42 €
*
74"/ 80" Flathead camshaft set
MCS-971304 - OEM style replacement. Set of 4. Fitment: 37-48 74" U; UL; 37-48 80" UH; ULH(NU)
Inhalt
1 Set
667,22 €
*
Feuling, Reaper 543 camshaft
MCS-588030 - .543" int.; .553" exh. valve lift. Requires high lift valve springs; as Feuling 566032 or 566034. Works with stock pushrods. Performance exhaust / slip-on mufflers and free flowing air cleaner recommended. Increased...
Inhalt
1 Stück
369,72 €
*
Feuling, Reaper Race Series 465 cam kit
MCS-588034 - Bolt-in. .445" int.; .465" exh. Good bottom end but above 2800 RPM it produces solid performance gains over stock. Free breathing slip-on mufflers / exhaust and air cleaner are recommended for best results. 1850-5950 RPM....
Inhalt
1 Stück
842,74 €
*
Feuling, Reaper 594 camshaft
MCS-588031 - .594" int.; .604" exh. valve lift. Requires high lift valve springs; as Feuling 566034 or 566037; performance lifters and adjustable pushrods. Increased compression ratio; head work; free flowing exhaust and air intake...
Inhalt
1 Stück
369,72 €
*
Feuling, Reaper 518 camshaft
MCS-588029 - Bolt-in. .518" int.; .528" exh. Great workhorse and direct replacement for the stock cam. The wide powerband produces more torque and horsepower throughout the entire RPM range. Performance exhaust / slip-on mufflers and...
Inhalt
1 Stück
369,72 €
*