MCS-912808 - These pipes come un-baffled and in a 1 3/4" diameter. Unbeatable classic chopper design. Incl. Paughco 718H2 and 731SB3 hanger brackets. Heatshield front 903483; rear 903498. Note: Heatshields must be ordered separately when...

MCS-912802 - Chrome. 1 3/4" diameter; slash cut end. With high mounted rear pipe. Also good solution to use as head pipes on which mufflers can be mounted. Incl. 731SB12 and #731SB8 mounting plates. Heatshield front 903483; rear 903498....

MCS-912800 - Standard 1 3/4" diameter; slash cut end. Without baffles. Also a good solution to use as head pipes on which mufflers can be mounted. With S-styleled rear pipe; routed under transmission. Incl. Paughco 731SB12 mounting plate...

MCS-908947 - S-pipe; rigid frame; kickstart; slider channels; incl. mount clamp. Heatshield rear 903403. Note: The S-pipe system is a 2-piece front header; like OEM; which is flattened to fit between generator and frame tube for improved...

MCS-908946 - Chrome. 1 3/4" diameter; slash cut end. With high mounted rear pipe. Also good solution to use as head pipes on which mufflers can be mounted. S-pipe; rigid frame; kickstart; slider channels. Heatshield rear 903403. Note:...

MCS-908944 - S-pipe. 1 3/4" head pipes. Designed to be used with universal mufflers. Rigid frame only; kickstart. Use 512595 P-clamp to mount. Heatshield rear 903403. Note: The S-pipe system is a 2-piece front header; like OEM; which is...

MCS-908943 - S-pipe. Extra short for mounting mufflers. 1 3/4" diameter; straight cut end. With high mounted rear pipe. Rigid frame; kickstart only. Heatshield rear 903403. Note: The S-pipe system is a 2-piece front header; like OEM;...

MCS-908924 - Swingarm & rigid frames; slider channels. Heatshield rear 903479. Note 1: Rear pipe routed under transmission. Less ground clearance in right turns. Note 2: Not S-pipe. Front pipe routed below frame tube. Less ground...

MCS-908923 - Standard 1 3/4" diameter; slash cut end. Without baffles. Also a good solution to use as head pipes on which mufflers can be mounted. Kick & E-start; swingarm & rigids with mech. brake; slider channels front & rear....

MCS-908918 - Swingarm frame & rigids without mech. brakes. Kick & e-start. Incl. Paughco 718F hanger bracket. slider channels. Heatshield rear 903476. Note: This is not a 2-piece S-pipe system; front pipe is routed below frame tube; but...

MCS-908904 - Chrome. S-pipe. 1-3/4" head pipes. Straight Cut. If so desired mufflers can be mounted. The rear pipe first goes down; close over the transmission; before becoming upswept. Extra long. Rigid frame; kickstart. Heatshield rear...

MCS-908903 - Chrome. S-pipe. Rigid frame. Kickstart. 1-3/4" head pipes with a gooseneck end. The rear pipe first goes down; close over the transmission; before becoming upswept. Heatshield rear 903399. Note: Heatshields must be ordered...