MCS-908784 - S-pipe; rigids only; slider channels. Heatshield rear 903492. Note: Heatshields must be ordered separately when required. When heatshields are not mentioned they are not available. Note: Back in the day the ''S-pipe'' design...

MCS-908782 - S-pipe. Rigid frame only. Standard 1 3/4" diameter; slash cut end. Without baffles. Also a good solution to use as head pipes on which mufflers can be mounted. With slider channels. Incl. Paughco 523-3 mount clamp....

MCS-908209 - Brass; tapered; for 1 inch bars with internal throttle Fitment: Customs with internal throttle

MCS-908774 - S-pipe. Rigid frame only. Slider channels. Heatshield rear 903403. Note: The S-pipe system is a 2-piece front header; like OEM; which is flattened to fit between engine and frame tube for improved ground clearance in right...

MCS-908768 - Chrome. S-pipe. Rigid frame. For use with universal mufflers. No slider channels. Use 512595 P-clamp to mount. Heatshield rear 903403. Note: The S-pipe system is a 2-piece front header; like OEM; which is flattened to fit...

MCS-908767 - Chrome. 1 3/4" diameter; slash cut end. S-pipe design; routes front header between alternator and frame tube for maximum ground clearance. May not fit with aftermarket frames. With high mounted rear pipe. Also good solution...

MCS-908766 - S-pipe. Stock 1-3/4" diameter crossover headpipes that are not connected to each other. Re-use stock hardware. Kickstart. Incl. Paughco 725E clamp. Note: The S-pipe system is a 2-piece front header; like OEM; which is...

MCS-908763 - Chrome. S-pipe. 1-3/4" head pipes. Straight Cut. If so desired mufflers can be mounted. The rear pipe first goes down; close over the transmission; before becoming upswept. Extra long. Rigid frame. Heatshield rear 903399....

MCS-908762 - Chrome. S-pipe. 1-3/4" head pipes. Slash Cut. If so desired mufflers can be mounted. The rear pipe first goes down; close over the transmission; before becoming upswept. Rigid frame; kickstart. Heatshield rear 903399. Note:...

MCS-908759 - Chrome. 1 3/4" head pipes. If desired mufflers can be mounted. Rear pipe wraps close around the oil tank and becomes upswept. Heatshield rear 903398. Fitment: 36-47 Knuckle with rigid frame (NU)

MCS-908758 - Chrome. S-pipe. 1-3/4" head pipes. Straight Cut. If so desired mufflers can be mounted. The rear pipe first goes down; close over the transmission; before becoming upswept. Rigid frame. Heatshield rear 903399. Note: The...

MCS-908737 - Slash Cut. With OEM 1-1/2" diameter. Without hardware. Can be shortended and used as head pipes for installing mufflers.. Fitment: 29-73 45" Flathead solo; side car & Servi-Car (NU)