Topseller
Sonic, 2-3 Jaw 4" reversible puller
MCS-954077 - Universal gear puller. Supplied with 3 jaws and can be used as a 2 or 3 jaw puller. - Size: 4" - Spread: 6" - Reach: 3.5" - Max load: 5000kg - Weight: 1430 grams - Height: - mm - Length: - mm - Width: - mm - Number of jaws...
Inhalt
1 Stück
52,50 €
*
Kukko, slide hammer 290mm OAL
MCS-951034 - For use with Kukko internal ball bearing extractors. - Overall length: 290mm - Mass of impact: 0.5kg - Slide impact length: 200mm - Rod connection thread: M12 - Internal thread: M12/M10 - Threaded adapters: AG: M10; IG: M7 -...
Inhalt
1 Stück
109,06 €
*
Kukko, internal ball bearing extractor. 5-8mm ID
MCS-951019 - Inner ball bearing puller used to pull bearings on the inside diameter or pull outer bearing races only. Used with 951034 slide-hammer device and 951036 counterstay support puller. - Inside diameter ball bearing in mm: 5-8 -...
Inhalt
1 Stück
108,03 €
*
Kukko, universal self-centering jaw gear...
MCS-951017 - With self-centering jaws. Designed for a wide variety of pulling jobs with tight or difficult access. - Number Of Jaws: 3 - Build Series: 43 - Spread (in mm): 10-60 - Depth (in mm): 50 - Maximum Load: 1500kg - Weight:...
Inhalt
1 Stück
87,58 €
*
Kukko, universal self-centering jaw gear...
MCS-951011 - With self-centering jaws. Designed for a wide variety of pulling jobs with tight or difficult access. - Number Of Jaws: 2 - Build Series: 43 - Spread (in mm): 10-60 - Depth (in mm): 50 - Maximum Load: 1000kg - Space Below...
Inhalt
1 Stück
69,15 €
*
Kukko, Quick adjusting jaws 100 mm
MCS-950993 - Extremely narrow arms. Set of 3. 24mm wide jaws. Stock replacement or optional Quick Adjusting arms / puller arms. Fits all of our 20 and 30 build series Kukko gear pullers with Quick Adjusting arms. - Puller arms look like:...
Inhalt
1 3er Packung
180,50 €
*
Kukko, Quick adjusting jaws 100 mm
MCS-950989 - Narrow arms. Set of 3. 30mm wide jaws. Stock replacement or optional Quick Adjusting arms / puller arms. Fits all of our 20 and 30 build series Kukko gear pullers with Quick Adjusting arms. - Puller arms look like: Drawing 2...
Inhalt
1 3er Packung
180,50 €
*
Kukko, Quick adjusting jaws 250 mm
MCS-950988 - Narrow arms. 2 jaws. 30mm wide jaws. Stock replacement or optional Quick Adjusting arms / puller arms. Fits all of our 20 and 30 build series Kukko gear pullers with Quick Adjusting arms. - Puller arms look like: Drawing 2...
Inhalt
1 Stück
181,92 €
*
Kukko, universal puller / separator and...
MCS-951079 - For professional and problem-free internal or external pulling of ball bearings; roller bearings and inner races. - Two-arm puller - Clamping span: 95mm - Clamping depth: 115mm - Clamping depth extensions: 95mm - Build...
Inhalt
1 Kit
544,92 €
*
Kukko, separator with quick clamp spindle
MCS-951077 - With quick clamp pressure spindle. Used with hand tools to pull ball bearings; roller bearings and inner races from a shaft where the bearing is installed tightly to another surface; so there is not enough room to use...
Inhalt
1 Stück
173,51 €
*
Kukko, puller for 951038 bearing separator
MCS-951040 - - Build Series: 18 - Side Screw Length (in mm): 50-150 - Side Screw Depth (in mm): 71-150 - Thread: M10 - Hex Drive (Male) (in mm): 13mm - Maximum Load: 3000kg - Maximum Torque: 40Nm - Weight: 0.825kg
Inhalt
1 Stück
98,83 €
*
Kukko, Counterstay / Counter support. 4000kg
MCS-951037 - For use with Kukko internal ball bearing extractors. - Reach: 165mm - Support Surface: 14mm x 18mm - Max load: 4000kg - Weight: 1.873kg. Note: The 951034/951035 slide hammers and 951036/951037 counterstay support pullers are...
Inhalt
1 Stück
148,77 €
*