Topseller
Feuling, camshaft needle bearing. Inner (1-pack)
MCS-993531 - Heavy duty full-needle style designed for standard to high load performance engines.. 2 bearings used for Twin Cam. 1 bearing used for M8. OEM replacement reference 9215 standard; 24018-10 SE upgrade bearing as standard for...
Inhalt
1 Stück
26,51 €
*
Feuling, M8 HP+ Performance Pushrods 0.040"...
MCS-993529 - 0.040" shorter is to compensate for decked heads and/or thinner head gaskets. Tapered 7/16" 4130 chromoly heat treated one-piece non-adjustable pushrod set. With a .095" wall thickness and precision concentricity. Increased...
Inhalt
1 Stück
223,67 €
*
S&S, M8 136" big bore cylinder & piston kit....
MCS-994437 - 2222cc kit. Black powder coated wrinkle finish cylinders with clear (highlighted) fins. Kit includes a forged 4.320" big bore piston kit; black wrinkle 4.320" big bore cylinders; 2 multi-Layer-Steel .030" head gaskets; 2...
Inhalt
1 Stück
1.903,72 €
*
PM, Race series cam cover. Black Ops
MCS-993407 - In black Ops = A subtle gloss black with black wrinkle combination finish. Elevate the style and performance of your Harley-Davidsonr M8 with the Race Series engine covers from Performance Machine. The Race Series covers are...
Inhalt
1 Stück
394,68 €
*
S&S, M8 cylinder stud set
MCS-986076 - Direct replacement for the stock M8 cylinder studs. Quality is much higher and recommended for performance builds. Complete kit. - 4140 Chrome Moly - Oil quenched and tempered to 39-44 HRC - 180;000psi Tensile Strength -...
Inhalt
1 Stück
123,14 €
*
S&S BUSHING CRANKCASE, PINION SHAFT+.005
MCS-531112 - Clearance for up to .798" lift cam with 1" base circle Fitment: 58-99 B.T. (NU)
Inhalt
1 Stück
82,37 €
*
JIMS, sprocket shaft. 57-76 XL
MCS-500018 - Fits with OEM flywheels. Sprocket shaft has keyway; use 23985-12 key (MCS 517945). Use nut (MCS 968011) on flywheel side. JIMS shafts are precision machined in Camarillo; California from a special order steel. Each and every...
Inhalt
1 Stück
179,15 €
*
S&S BUSHING CRANKCASE PIN SHAFT +.025"
MCS-531109 - Fitment: 58-99 B.T. (NU)
Inhalt
1 Stück
85,06 €
*
36-47 solid tappet assembly, intake. +.005"
MCS-517837 - Complete with roller. OEM style oversized reproduction lifter. Note: Standard size is .730" O.D. Fitment: 36-47 Knucklehead (NU)
Inhalt
1 Stück
126,88 €
*
Andrews, M8 camshaft .485" valve lift
MCS-975460 - Bolt-in. For 107"-132" engines. Highest lift available for stock valve springs. Low & midrange power (1500-5600+ RPM). Note: Bearings; o-rings and hardware are not included. Fitment: 18-23 Softail; 17-23 Touring
Inhalt
1 Stück
313,12 €
*
Andrews, 465B M8 camshaft .464"/.460" valve lift
MCS-975459 - Bolt-in. For 107" to 124" engines. .464" intake and .460" exhaust valve lift. Agressive cam for middle to heavy weight bikes. Low & midrange power. (1200-5600+ RPM). Note: Bearings; o-rings and hardware are not included....
Inhalt
1 Stück
313,12 €
*
Sprocket shaft bearing spacer shim .090"
MCS-969110 - Used to set correct pre-load onto sprocket shaft bearing. Approx. dimensions: 1.265" ID; 1.530" OD. Fitment: 69-02 B.T.; TC/B(NU)
Inhalt
1 5er Packung
17,13 €
*